Hardware Validation Engineer Interview Questions | Glassdoor

Hardware Validation Engineer Interview Questions


Hardware validation engineer interview questions shared by candidates

Top Interview Questions

Sort: RelevancePopular Date

Tell me the waveform output at probe 1 and 2. The problem consist of a dc 5V going to a 5V sine wave input going to a capacitor. This system is then going into a 12V dc input with a two 1K resistor in parallel. This feeds into a emitter side of a transistor with a +-3V toggle as a base. The collector is going to ground. The two probe points is (1) before the cap and (2) before the emitter.

1 Answer

explain north south bridge, PCIe, SATA, I2C in detail. explain projects(verilog) in detail.

None really. Just review your technical basics depending on your background.

14 of 4 Interview Questions