Notifications

Are you open to new opportunities?

Upload your resume to increase your chances of getting noticed.

Oerlikon
3.5
Integration Electrician
Chattanooga, TN
$23.41 - $33.45 Per Hour (Employer provided)
Use a variety of tools and equipment such as power construction equipment, measuring devices, power tools, and testing equipment including oscilloscopes,……
30d+
Siemens Healthineers
4.0
CT Technologist
Providence, RI
Easy Apply
Best Places to Work
Must have a RI state radiation license and CT supplemental license from the DOH. Obtains telephone direction of services engineer to make equipment adjustments.…
6d
Siemens Healthineers
4.0
CT Technologist
Charlotte, NC
Easy Apply
Best Places to Work
Must have a RI state radiation license and CT supplemental license from the DOH. Obtains telephone direction of services engineer to make equipment adjustments.…
6d
Siemens Healthineers
4.0
CT Technologist
Washington, DC
Easy Apply
Best Places to Work
Must have a RI state radiation license and CT supplemental license from the DOH. Obtains telephone direction of services engineer to make equipment adjustments.…
6d
Siemens Healthineers
4.0
CT Technologist
Los Angeles, CA
Easy Apply
Best Places to Work
Must have a RI state radiation license and CT supplemental license from the DOH. Obtains telephone direction of services engineer to make equipment adjustments.…
6d
SpectronRx
3.0
Cyclotron Engineer
Bunker Hill, IN
$105K - $125K (Employer provided)
Easy Apply
Valid Indiana driver's license. Time Management - Managing one's own time and the time of others. Chemical, airborne, mechanical and radiation hazards will also……
30d+
Hendrickson
3.3
Controls Systems Engineering Supervisor
North Canton, OH
$93K - $132K (Glassdoor est.)
Easy Apply
Provides leadership and expertise in the areas of programming of ECU's (Electronic Control Units), operator interface design, system implementation, testing and……
30d+
MTSI
4.7
Rocket Booster SME
Huntsville, AL
Prepare detailed technical documentation, including requirements specifications, design analyses, test reports, and technical presentations.…
30d+
Precision X-Ray
3.3
Mechanical Engineer
Madison, CT
$68K - $93K (Glassdoor est.)
Easy Apply
Duties include a broad range of mechanical design with a focus upon design for manufacturing, design for service, and value engineering.…
3d
River Metals Recycling
3.8
Power Systems Engineer II
Cincinnati, OH
$79K - $102K (Glassdoor est.)
Assist with reviewing contractor designs, drawings, and submittals for compliance and technical soundness. Ensure electrical work and designs align with OSHA,……
22d
Entergy
3.6
Fire Protection Engineer (Russellville - Relocation Available)
Little Rock, AR
As a Fire Protection Engineer within the Central Programs Engineering Department, you will be responsible for maintaining fire protection design control and……
30d+
Wilder Systems
2.5
Applications Engineer II
Oklahoma City, OK
$75K - $100K (Employer provided)
Easy Apply
Working in a growing and fast-moving team, you will translate customer requirements into deployed robotic systems, collaborate across interdisciplinary……
18d
Challenge Manufacturing
2.6
Sr Mechatronics/Controls Technician
Holland, MI
Easy Apply
Use electrical system knowledge and electrical schematics / prints to troubleshoot electrical components and circuits (Connecting circuit breakers, transformers……
30d+
Kelvion
2.8
Structural Engineer
Catoosa, OK
$77K - $108K (Glassdoor est.)
Easy Apply
Bachelor of Science degree (B.S.) in Structural/Civil Engineering from an accredited four-year college or university; Professional Engineering (PE) license and……
30d+
Ecotope, Inc.
Senior Mechanical Engineer
Seattle, WA
$106K - $164K (Employer provided)
Easy Apply
Ecotope is looking for a creative, motivated, and organized *Senior Mechanical Engineer *to lead projects to design, research, develop, test, demonstrate, and……
11d
WEGMANN automotive
4.1
Project Engineer
Murfreesboro, TN
$70K - $93K (Glassdoor est.)
Primary job responsibilities are to use engineering expertise and experience to: (i)investigate, design, develop or contract, and test concepts for improving……
30d+
Precision Plus (WI)
4.5
Quality Technician - 2nd Shift
Elkhorn, WI
$20.00 - $24.00 Per Hour (Employer provided)
Easy Apply
You will conduct detailed inspections, use precision measuring tools, and interpret prints to meet design specifications.…
10d
Tad PGS
3.9
Senior Mechanical Engineer
Centennial, CO
$65.00 - $85.00 Per Hour (Employer provided)
Easy Apply
From LEO/GEO satellites to small sat platforms and on-orbit servicing vehicles, you will own the mechanical design of flight systems that operate in some of the……
7d
Ecolab
3.5
Quality Technician
Glenwood, IL
$30.00 Per Hour (Employer provided)
Interface with equipment design engineers to ensure electrical, mechanical, and control system tests are sufficient. Operate a forklift and pallet jack.…
24h
SpectronRx
3.0
Cyclotron Operator
Bunker Hill, IN
$30.00 - $33.00 Per Hour (Employer provided)
Easy Apply
Valid Indiana driver's license. Time Management - Managing one's own time and the time of others. Chemical, airborne, mechanical and radiation hazards will also……
30d+
GEOTEK
3.9
Sr. Applications Engineer
Stewartville, MN
$98K - $138K (Employer provided)
Easy Apply
This is a product-focused engineering role- if you are a strong mechanical or structural engineer who enjoys owning product design from concept through……
6d
GEM Technology
4.0
Design Engineer
Oak Ridge, TN
$120K - $160K (Employer provided)
Easy Apply
Execute mechanical design and detailing of components and assemblies for fusion-relevant environments, including vacuum-compatible hardware and actively cooled……
30d+
Rice Lake Weighing Systems
3.6
Senior Mechanical Engineer
Kent, WA
$107K - $146K (Glassdoor est.)
Easy Apply
This role places a strong emphasis on strain gage-based load cell transducer design and development, including mechanical design for optimized strain……
30d+
The Sheridan Group
2.9
Lead Mechanical Engineer
Chelsea, MI
$77K - $104K (Glassdoor est.)
Associate's degree in related field required or combination of experience and education equivalent to five years of related experience required.…
3d
RTX
3.8
Senior Principal Electrical Subsystem Architect
Tucson, AZ
$132K - $252K (Employer provided)
Coordinate with systems engineering, digital design, RF, modeling/simulation, GNC, and manufacturing disciplines to ensure robust and producible electrical……
30d+
Coca-Cola Southwest Beverages
3.6
Electro-Mechanical Tech (Nights)
Abilene, TX
$34.38 - $42.02 Per Hour (Employer provided)
The Controls Technician must ensure plant electrical and control systems are installed, maintained and modified in accordance with local, state and national……
19d
Capgemini
4.1
Hardware Validation Engineer
Santa Clara, CA
$73K - $174K (Employer provided)
With this goal in mind, we develop scalable tools, processes, hardware, and software solutions deployed for characterization, validation, and manufacturing.…
30d+
Advantest
3.8
Lead Application Engineer (7431)
San Jose, CA
$130K - $200K (Employer provided)
Easy Apply
This role is tailored for a deeply technical individual with advanced knowledge of test solutions of entire integrated test cells and hands-on expertise with……
30d+
CPS Energy
3.2
Engineering Associate 1
San Antonio, TX
$58K - $85K (Glassdoor est.)
Ability to get Engineer In Training certification and Texas Professional Engineer license. Provide engineering and technical support to System Operations and……
12d
Purple Rhombus Inc
Level 2 Aerospace Engineer – Airframe Structures, Unmanned Aircraft Systems (UAS)
Fort Worth, TX
$86K - $114K (Employer provided)
Easy Apply
Contribute substantively to peer and design reviews — both presenting your own work and reviewing others’ — communicating technical results clearly and……
24h

Oerlikon

3.5

Integration Electrician

Chattanooga, TN

$23.41 - $33.45 Per Hour (Employer provided)

Is your resume a good match?

Use AI to find out how well the skills on your resume fit this job description.

Location: Chattanooga
Employment Status: Hourly Full-Time
Function: Manufacturing
Pay Grade and Range: USXX - Grade USXX Hourly 40 $23.41 - $33.45
Bonus Plan: OIP
Target Bonus: 5.0
Hiring Manager: Clinton Travis Mckenzie
Recruiter: Crystal Denise Dishman

Internal Candidate Eligibility Criteria:
1. Is a Lincoln Electric employee with at least 1 year of service
2. Is NOT on an active Performance Improvement Plan (PIP)

Job Requirements

Position Summary: Intermediate level integrated systems electrical assembly knowledge and ability.

The following are duties and responsibilities required of and Integration Electrician II. It is understood that some of these duties and responsibilities will require assistance from more senior electricians. However, it is expected that the Integration Electrician II will strive to learn and gain experience in order to master these duties and responsibilities.

Role qualifications:

High school diploma/GED
3 years or more related experience

Job Responsibilities

Checks for parts when missing or due
Properly fill out non-conformance sheet for modifications performed during assembly
Locate CAD drawings for the electrical assembly process
Trains Electrical Integration Tech I when requested
Must be able to read and prepare drawings or follow blueprints/schematics to determine the location of wiring and equipment and to ensure conformance to building and safety codes
Inspect electrical systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair, as well as to ensure compliance with codes
Test electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures using testing devices such as ohmmeters, voltmeters, and oscilloscopes in order to ensure compatibility and safety of the system
Takes inventory, orders, and restocks items when assigned
Cross-trains with other departments as assigned
Connect wires to circuit breakers, transformers, or other components
Construct and fabricate parts, using hand tools and according to specifications
Maintains an effective preventive maintenance system
Maintains plant quality and safety requirements
Completes assigned work efficiently and per Tennessee Rand Standard Operating Procedures (SOPs) and Work Instructions (WI)
Assists in troubleshooting and correcting electrical problems in a fast-paced environment and conveys information to engineers to update or redesign equipment
Works in a team performing work orders and providing technical support
Records all maintenance activities, repairs and ensures all required materials and/or parts are available, prepared and organized as necessary to optimize manufacturing operations
Tracks and develops electrical maintenance work
Confers with team leads to identify or prevent potential problems and work through to resolution
Travels to customer locations to reassemble cells
Performs electrical rebuilds as required
May assist in estimating time required to complete the required tasks
Coordinates work with customer contacts to verify drop locations, hot work permits and other off-site requirements
Complete required tasks by project specific dates
Use a variety of tools and equipment such as power construction equipment, measuring devices, power tools, and testing equipment including oscilloscopes, ammeters, and test lamps.
Work from ladders, scaffolds, and boom truck
Maintain or repair electrical wiring, equipment, and fixtures
Run wires through conduit
Test or repair electrical based equipment
Work closely with engineers and contractors
Be knowledgeable of OSHA codes and requirements
Be aware of safety and proper lifting and transporting heavy and oversize loads
Be aware of automated equipment and its inherent dangers
Be proactive in continuous improvement methods
Maintain orderliness and cleanliness in the maintenance of equipment.
Follow directions and ensure a safe and high quality product and production environment
Have good verbal and written communication skills
Maintain a skills inventory score indicative of a level II or higher technician

Essential Skills and Experience

Measurement skills (measuring tape, calipers, etc.)
Hand/power tool knowledge
Intermediate-Advanced Mechanical ability
Work requires at least 2 years in electrical construction or maintenance, which may include time in an approved apprenticeship program, or an equivalent combination of relevant education and experience.
Some industrial electrical experience and troubleshooting in both electrical circuitry and PLC is a requirement.
Preventative maintenance experience is recommended
Experience with robotic equipment is recommended
Willing to travel to customers’ sites
Demonstrate concern for safety on project of crew and others
Intermediate-Advanced knowledge of electrical components used in automation
A general knowledge of the Quality Program Manual
A general knowledge of WI-43
A general knowledge of Tennessee-Rand Equipment Build Standards
A general knowledge of Tennessee-Rand Technical Guidelines
A general knowledge of industrial drives, AC-DC power, electrical instrumentation,
DCS, industrial controls/DCS, DCS/PLC, control valves, blueprint schematic reading,
AC/DC schematics, electrical PLC, and general schematic layouts.

Environmental Health and Safety

Understand the Company’s EHS Policy and how it relates to this job.
Be aware of OSHA & EPA laws and regulations as well as the Company’s Plant Rules and Regulations that pertain to this job.
Work in a safe and environmentally friendly manner and observe all company EHS procedures.
Immediately notify the Supervisor if there is any safety hazard, any equipment not operating correctly, or if there are any questions regarding EHS procedures.
Attend required EHS training

Physical demands and work environment: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Physical demands: While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee frequently is required to stand; walk; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee is required frequently to work from ladders and scaffolds. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision.

Work environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly exposed to risk of electrical shock. The employee is frequently exposed to moving mechanical parts and high voltages. The noise level in the work environment is usually moderate.

Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Nearest Major Market: Chattanooga
Job Segment: Technical Support, Technology

See company reviews

Base pay range

The minimum salary is $23.41 and the max salary is $33.45.

$23.41 – $33.45/hr (Employer provided)

$28.43

/hr Median

Chattanooga, TN

If an employer includes a salary or salary range on their job, we display it as "Employer Provided". If a job has no salary data, Glassdoor displays a "Glassdoor Estimate" if available. To learn more about "Glassdoor Estimates," see our FAQ page.

Working here doesn’t have to be a secret

3.5

Recommend to a friend
Approve of CEO
CEO: 2 Ratings

Oerlikon

3.5

Integration Electrician

Chattanooga, TN

$23.41 - $33.45 Per Hour (Employer provided)

Oerlikon

3.5

Integration Electrician

Chattanooga, TN

$23.41 - $33.45 Per Hour (Employer provided)

Is your resume a good match?

Use AI to find out how well the skills on your resume fit this job description.

Integration Electrician

Internal Candidate Eligibility Criteria:
1. Is a Lincoln Electric employee with at least 1 year of service
2. Is NOT on an active Performance Improvement Plan (PIP)

Job Requirements

Position Summary: Intermediate level integrated systems electrical assembly knowledge and ability.

Role qualifications:

High school diploma/GED
3 years or more related experience

Job Responsibilities

Checks for parts when missing or due
Properly fill out non-conformance sheet for modifications performed during assembly
Locate CAD drawings for the electrical assembly process
Trains Electrical Integration Tech I when requested
Must be able to read and prepare drawings or follow blueprints/schematics to determine the location of wiring and equipment and to ensure conformance to building and safety codes
Inspect electrical systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair, as well as to ensure compliance with codes
Test electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures using testing devices such as ohmmeters, voltmeters, and oscilloscopes in order to ensure compatibility and safety of the system
Takes inventory, orders, and restocks items when assigned
Cross-trains with other departments as assigned
Connect wires to circuit breakers, transformers, or other components
Construct and fabricate parts, using hand tools and according to specifications
Maintains an effective preventive maintenance system
Maintains plant quality and safety requirements
Completes assigned work efficiently and per Tennessee Rand Standard Operating Procedures (SOPs) and Work Instructions (WI)
Assists in troubleshooting and correcting electrical problems in a fast-paced environment and conveys information to engineers to update or redesign equipment
Works in a team performing work orders and providing technical support
Records all maintenance activities, repairs and ensures all required materials and/or parts are available, prepared and organized as necessary to optimize manufacturing operations
Tracks and develops electrical maintenance work
Confers with team leads to identify or prevent potential problems and work through to resolution
Travels to customer locations to reassemble cells
Performs electrical rebuilds as required
May assist in estimating time required to complete the required tasks
Coordinates work with customer contacts to verify drop locations, hot work permits and other off-site requirements
Complete required tasks by project specific dates
Use a variety of tools and equipment such as power construction equipment, measuring devices, power tools, and testing equipment including oscilloscopes, ammeters, and test lamps.
Work from ladders, scaffolds, and boom truck
Maintain or repair electrical wiring, equipment, and fixtures
Run wires through conduit
Test or repair electrical based equipment
Work closely with engineers and contractors
Be knowledgeable of OSHA codes and requirements
Be aware of safety and proper lifting and transporting heavy and oversize loads
Be aware of automated equipment and its inherent dangers
Be proactive in continuous improvement methods
Maintain orderliness and cleanliness in the maintenance of equipment.
Follow directions and ensure a safe and high quality product and production environment
Have good verbal and written communication skills
Maintain a skills inventory score indicative of a level II or higher technician

Essential Skills and Experience

Measurement skills (measuring tape, calipers, etc.)
Hand/power tool knowledge
Intermediate-Advanced Mechanical ability
Work requires at least 2 years in electrical construction or maintenance, which may include time in an approved apprenticeship program, or an equivalent combination of relevant education and experience.
Some industrial electrical experience and troubleshooting in both electrical circuitry and PLC is a requirement.
Preventative maintenance experience is recommended
Experience with robotic equipment is recommended
Willing to travel to customers’ sites
Demonstrate concern for safety on project of crew and others
Intermediate-Advanced knowledge of electrical components used in automation
A general knowledge of the Quality Program Manual
A general knowledge of WI-43
A general knowledge of Tennessee-Rand Equipment Build Standards
A general knowledge of Tennessee-Rand Technical Guidelines
A general knowledge of industrial drives, AC-DC power, electrical instrumentation,
DCS, industrial controls/DCS, DCS/PLC, control valves, blueprint schematic reading,
AC/DC schematics, electrical PLC, and general schematic layouts.

Environmental Health and Safety

Understand the Company’s EHS Policy and how it relates to this job.
Be aware of OSHA & EPA laws and regulations as well as the Company’s Plant Rules and Regulations that pertain to this job.
Work in a safe and environmentally friendly manner and observe all company EHS procedures.
Immediately notify the Supervisor if there is any safety hazard, any equipment not operating correctly, or if there are any questions regarding EHS procedures.
Attend required EHS training

Physical demands: While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee frequently is required to stand; walk; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee is required frequently to work from ladders and scaffolds. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision.

Work environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Nearest Major Market: Chattanooga
Job Segment: Technical Support, Technology

See company reviews

Base pay range

The minimum salary is $23.41 and the max salary is $33.45.

$23.41 – $33.45/hr (Employer provided)

$28.43

/hr Median

Chattanooga, TN

Working here doesn’t have to be a secret

3.5

Recommend to a friend
Approve of CEO
CEO: 2 Ratings

Are you open to new opportunities?

3,545 Performance/Load Test Engineer jobs in United States

Base pay range

Working here doesn’t have to be a secret

Base pay range

Working here doesn’t have to be a secret