Custom Molded Products Reviews | Glassdoor

Custom Molded Products Reviews

To filter reviews, or .

Found 12 reviews

2.9
StarStarStarStarStar
Rating TrendsRating Trends
50%
Recommend to a Friend
  1. "Electrical Engineer"

    StarStarStarStarStar
    • Work/Life Balance
    • Culture & Values
    • Career Opportunities
    • Compensation and Benefits
    • Senior Management
    Former Employee - Electrical Engineer in Newnan, GA
    Recommends
    Positive Outlook
    Approves of CEO

    I worked at Custom Molded Products full-time for more than 2 years

    Pros

    Great company to work with. Shows a good team work. Supporting management. Overall one of the best company I worked with. Higher management supports the employee growth along with company growth.

    Cons

    No cons. Company is limited with scope of electrical field. I changed because I like to learn more about sensors.

    Advice to Management

    No advice to management they are doing great. I can only wish All the best for future.

    Custom Molded Products2018-03-05
  2. "clean place low play"

    StarStarStarStarStar
    • Work/Life Balance
    • Culture & Values
    • Career Opportunities
    • Compensation and Benefits
    • Senior Management
    Former Employee - Production Worker in Wilmington, OH
    Doesn't Recommend
    Neutral Outlook

    I worked at Custom Molded Products full-time for more than a year

    Pros

    clean factory, nice people, 3 shifts to choose from

    Cons

    low pay, fast paced, high turnover

    Custom Molded Products2019-04-05
  3. "Accounting & Finance"

    StarStarStarStarStar
    • Work/Life Balance
    • Culture & Values
    • Career Opportunities
    • Compensation and Benefits
    • Senior Management
    Current Employee - Senior Accountant in Union City, GA
    Doesn't Recommend
    Neutral Outlook
    No opinion of CEO

    I have been working at Custom Molded Products full-time for more than a year

    Pros

    Salary was competitive with the market

    Cons

    Poor management and training Favoritism reigned within in the department causing hostility in the work environment Upper Management often berated previous and current employees Benefit package Lack of work life balance Constant Turnover(s)

    Advice to Management

    I have none because if you don’t meet their perception or cultural dynamics you will be fired for some reason.

    Custom Molded Products2019-04-11
  4. "Small Company, Large Potential"

    StarStarStarStarStar
    • Work/Life Balance
    • Culture & Values
    • Career Opportunities
    • Compensation and Benefits
    • Senior Management
    Former Employee - Engineering 
    Recommends
    Positive Outlook

    I worked at Custom Molded Products full-time for more than 4 years

    Pros

    Work/Life Balance is good as long as you make it known that it is a priority for you. One can gain exposure to many different roles and responsibilities if you're up for a challenge. Company has made much progress in regards to process and personnel improvement over the last 3 years. This trend looks to continue. If you do not have the right tools for your job, just ask and you shall receive (most of the time). Management...

    Show More

    Cons

    Need to be better outline career development plans. Communication with manufacturing locations need to be improved. Pool and Spa industry is traditionally slow to adapt to change. While CMP is an industry leader, the rate of adoption for new practices and technologies needs to improve. Need to be more proactively competitive with market based compensation and incentives.

    Advice to Management

    Establish career development plans for all employees. Promote transparency throughout the company to improve communication, encourage knowledge sharing, and drive change through value creation.

    Custom Molded Products2017-04-09
  5. "Manager"

    StarStarStarStarStar
    • Work/Life Balance
    • Culture & Values
    • Career Opportunities
    • Compensation and Benefits
    • Senior Management
    Current Employee - Anonymous Employee in Newnan, GA
    Recommends
    Positive Outlook

    I have been working at Custom Molded Products full-time for more than 9 years

    Pros

    Employees make the company a good place to work.

    Cons

    No negatives about the company it is growing very fast.

    Advice to Management

    Listen to the employees. Their knowledge will make you succeed even more than you are

    Custom Molded Products2017-01-13
  6. Helpful (3)

    "Today CMP execs are reaping the seeds they sowed"

    StarStarStarStarStar
    • Work/Life Balance
    • Culture & Values
    • Career Opportunities
    • Compensation and Benefits
    • Senior Management
    Current Employee - Hourly in Newnan, GA

    I have been working at Custom Molded Products full-time for more than 6 years

    Pros

    It's a growing company that recently obtained (sold 51% to) new investors that want to continue growing the company and buy out competitors. The previous investors (PNC Bank) made out like bandits in profits. Money is being made and there's more to come!

    Cons

    ...but the money doesn't trickle all the way down! What I mean by the review title: We're currently doing cycle count and numbers are off by a lot!!! CFO is upset! But this is a quintessential example of what happens when most of the departments are understaffed, constantly overworked and grotesquely underpaid! The warehouse guys have been put to work 13 hours straight. What do these geniuses think happens when you do...

    Show More

    Advice to Management

    To HR & Managers: Don't keep salary talk until the very end of the interview process and stop lying when posting salary in job ads. I've heard from 3 different employees, 4 including me. That's not a mistake, that's an M.O.. And stop lying about being able to renegotiate after probation period. You've done that to 5 different employees that I have heard from directly. Hold your bosses to transparency and fairness if it's...

    Show More
    Custom Molded Products2016-12-31
  7. Helpful (3)

    "Discrimination and Unfair Treatment"

    StarStarStarStarStar
    • Work/Life Balance
    • Culture & Values
    • Career Opportunities
    • Compensation and Benefits
    • Senior Management
    Former Employee - Anonymous Employee in Newnan, GA
    Doesn't Recommend
    Positive Outlook

    I worked at Custom Molded Products full-time for more than a year

    Pros

    There are some good people that work there and wish for the time when the company was the way it used to be in yesteryear - they are not happy with the new regime but good people nonetheless that don't tell your business to everyone else.

    Cons

    HR administrator has an extremely bad tendency of advising everyone in management what you are telling her. Discrimination from my manager for being a woman - as also experienced by another woman who worked under him for one year and did everything in her power to get out from under his group. I will not forget how elated she was at her recent promotion. To be asked (since day 10) that I would need to make a decision...

    Show More

    Advice to Management

    Take management classes from the CFO or somewhere - you will get 150% from your employees just because they like you - your production at CMP Newnan could be much higher if you treat your employees as a manager should. Management styles DON'T include ruling with an iron fist or treating someone badly because they are a female - people don't like to be mistreated. Just because someone is a woman doesn't mean they can't...

    Show More
    Custom Molded Products2016-04-20
  8. "Reciever / Project"

    StarStarStarStarStar
    • Work/Life Balance
    • Culture & Values
    • Career Opportunities
    • Compensation and Benefits
    • Senior Management
    Former Employee - Receiver/Project in Newnan, GA
    Recommends
    Positive Outlook

    I worked at Custom Molded Products full-time for more than 2 years

    Pros

    Company is very much a team company.

    Cons

    Department should be more cross trained

    Custom Molded Products2015-08-24
  9. "Company Culture is Improving"

    StarStarStarStarStar
    • Work/Life Balance
    • Culture & Values
    • Career Opportunities
    • Compensation and Benefits
    • Senior Management
    Former Employee - Anonymous Employee 

    I worked at Custom Molded Products

    Pros

    Supervisors are good at teaching whenever you need to learn. There are some great employees at this company that you can trust. You can see improvement of company culture.

    Cons

    Needs more organization within departments. Doesn't want to hand out raises even when some deserve it. Company culture needs to be improved. Needs more recognition for long term employees.

    Custom Molded Products2015-08-12
  10. Helpful (4)

    "Definitely NOT a good place to work at"

    StarStarStarStarStar
    • Work/Life Balance
    • Culture & Values
    • Career Opportunities
    • Compensation and Benefits
    • Senior Management
    Former Employee - Anonymous Employee 
    Doesn't Recommend
    Neutral Outlook

    I worked at Custom Molded Products

    Pros

    The company is growing very fast. They have had record sales this past 2014 and have won many awards, making Custom Molded Products a name that is starting to be mentioned among the largest in the industry. The executives have bought employees lunch and professed how proud they are and how the company would not have made it to where it is without the employees. For 2014 however, the employees' bonus was cut. Mine was...

    Show More

    Cons

    Even though the company advertises competitive wages (at least when I was hired), you will get paid FAR BELOW the median wage. The company will expect 200% performance from you, however... You will also be fired for merely looking at the wrong person in the wrong way, or if you get sick too often. One employee had a child that was sick and had to miss more days than what is allotted for personal issues. That employee...

    Show More

    Advice to Management

    It has been proven time and time again that companies that pay proper wages (median or above) for their job description, have more productive employees, less turn-around and a much better work atmosphere. Why can't Custom Molded products understand this?

    Custom Molded Products2015-01-02
Found 12 reviews