I applied through a recruiter. The process took 5 days. I interviewed at Analog Devices
Interview
They explain what will be our role and expectation from us and why you are changing job and reason ? . Then they continue with a technical interview by giving design logic and write a tb_top code
Interview questions [1]
Question 1
NOC : one side we have 3 AHB masters, 1 APB master and other side 3 APB Slaves,
0x0000_0000 to 0x_1000_0000 1st APB SLAVE
0x_4000_0000 to 0x_8000_0000 2nd slave
oxC000_0000 to 0xFFFF_FFFF 3rd slave
In addition to above imagine AHB master number 3 and APB master will provide error response for address range oxC000_0000 to 0xFFFF_FFFF. Note AHB master number 1 and 2 can still access address range oxC000_0000 to 0xFFFF_FFFF.
Write a top_tb for this design ?
What are the coverpoints or bins you can write ?
What is difference between functional coverage and code coverage?
If functional coverage is there, why code coverage is required?
I applied through an employee referral. I interviewed at Analog Devices (Bengaluru) in Dec 2025
Interview
In the interview I was asked questions from my resume and some questions built from them
Most of the projects in my resume dealt with digital electronics.The interviewer was quite supportive and gave clues to reach to the answers
Interview questions [1]
Question 1
The questions I encountered were
1)If given the power required for a bit flip in a gray counter and a normal counter,analyse which would consume least power
2)i had done a project on developing a traffic light controller using FSM so I was asked to draw the state diagram
3)I was asked to write a c code for developing aN FSM that changes state based on some conditions
4)Questions were asked related to microcontroller like where the retrurn address will be stored upon raising an interrupt
I interviewed at Analog Devices (Limerick, Limerick)
Interview
In the beginning, questions about your experiences written in your CV will be asked. Then, some technical questions about what you can do for the job. Finally, your own questions.
Interview questions [1]
Question 1
Can you give us some further explanation about the internship you did this year.
