I applied through college or university. The process took 4 days. I interviewed at Analog Devices (Bengaluru) in Jul 2016
Interview
First they short listed students above 8 cgpa. Followed by the written test in digital basics and DSP concepts. The written cleared students should attend two technical interviews followed by the HR. The first technical interview was average level, the second one was little bit tough but if you know the basics well and strong, you can easily sail through. Also they asked to find out the solutions for the unsolved problems in the written test. Already solved problems they asked again how did you arrive at particular answer. They are basically checking how you are approaching the particular problem rather than the complete solution. Fundamentals of digital design in Morris Mano can help to cross the interview process.
Interview questions [1]
Question 1
Asynchronous FIFO depth calculation, System verilog testbench overview
I applied through college or university. I interviewed at Analog Devices (Nūzvīd) in Dec 2025
Interview
its two round written and interview happen on our campus at iiit Nuzvid. the questions include from mainly digital electronics and static timing analysis, signals and system, verilog programming language
Interview questions [1]
Question 1
asynchronus fifo and synchronous fifo and clock domain crossing
I applied through a staffing agency. I interviewed at Analog Devices in Feb 2025
Interview
I applied in the analog website, they made me a personal interview with the hr manager and then after 3 days a senior engineer made me the technical interview for the position of Digital Design intern
Interview questions [1]
Question 1
Design a D flipflop, Design a nand Gate with transistors, Explain the real output of the nand Gate, Explain the capacitance of the NAND gate and how It affects to trise and tfall Translate It in a MOSFET and get the capacitance,
design a layout of a nand Gate, he tried to Explain me somethimg if i didn't know how to do It and see if could learn from It and apply It in another cases
First we had an Online Test. Online Test has two sections in which first section is technical as I applied for digital design Engineer role. Time is 60 minutes we had 17-20 questions in which some of the questions are bit tricky. And second section has aptitude questions. Now shortlisting is done just before the interview only there is 3-4 hours gap so be prepared. My interview went for one and half hour in which two panels took my interview. It was a great experience.
Interview questions [1]
Question 1
1. Introduce Yourself 2. If you want to build a microcontroller from scratch what are the steps you will carry out? 3. Gave one question from FIFO depth calculation 4. Do you know anything about DFT? 5. Asked about projects that are mentioned in the resume. 6.What is Asynchronous FIFO? verilog code 7. Tell the logic for Asynchronous FIFO full and empty conditions? 8. Some HR questions
